| |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
55 YEARS
CONVEYING ENERGY |
|
| |
DOUBLE UNIVERSAL JOINTS SERIES S200 |
Print |
|
 |
|
Shafts in induction hardened and tempered 41 Cr Mo 4 (shaft with sun
gear in cemented and hardened 18 Ni Cr Mo 5); available on request in 50
Cr V 4. Central body in hardened and tempered C 50.
Double universal joints with enclised-ring type central body. For torques
from 1100 Nm to 3100 Nm. The output shaft can be fitted with a shaver
or ground teeth sun gear for direct coupling to the planetary gear unit.
|
 |
|
Tipo/Tip/Type |
200 |
210 |
215 |
220 |
| Mtmax |
Nm |
1100 |
1600 |
2000 |
3100 |
| ßmax |
° |
55 |
40 |
50 |
40 |
50 |
45 |
50 |
| A |
mm |
88 |
106 |
111 |
118 |
| B |
mm |
58 |
62 |
65 |
64 |
70 |
72 |
75 |
| Cmin |
mm |
126 |
128 |
141 |
134 |
146 |
154 |
159 |
| D |
mm |
138 |
148 |
156 |
156 |
166 |
173 |
180 |
| Fmin |
mm |
34 |
33 |
38 |
35 |
38 |
41 |
42 |
| Gmin |
mm |
24 |
27 |
29 |
34 |
| Y |
mm |
3,69 |
1,99 |
3,36 |
2,05 |
3,62 |
2,97 |
3,88 |
| X |
mm |
7,38 |
3,98 |
6,72 |
4,11 |
7,24 |
5,93 |
7,76 |
|
|
X = Slip at ßmax
Y = Displacement for ßmax
The Mtmax value indicated corresponds to static torque at
an angle of 0°; it is only briefly applicable and must not be exceeded.
The information in this technical data sheet allow user
to make a guideline selection of the type of joint in accordance with
available clearance, torque, steering and service life requirements.
Joints of different sizes and for larger angles are available on request.
Please contact the SOREM engineering department for further details and
information regarding products with different characteristics to those
indicated
SOREM reserves the right to change data and product characteristics without
prior notification.
|
|
