| |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
55 YEARS
CONVEYING ENERGY |
|
| |
DOUBLE UNIVERSAL JOINTS SERIES S400 |
Print |
|
 |
|
Shafts in induction hardened and tempered 41 Cr Mo 4 (shaft
with sun gear in cemented and hardened 18 Ni Cr Mo 5); available on request
in 50 Cr V 4. Central body in hardened and tempered C 50.
Double universal joints with enclised-ring type central
body. For torques from 3400 Nm to 11000 Nm. Crosses with offset pins in
order to reduce clearance of the joint to a minimum during rotation. The
output shaft can be fitted with a shaver or ground teeth sun gear for
direct coupling to the planetary gear unit.
|
|
 |
| Tipo/Tip/Type |
435 |
438 |
442 |
450 |
455 |
460 |
| Mtmax |
Nm |
5100 |
7000 |
8500 |
11000 |
13000 |
16900 |
| ßmax |
° |
42 |
47 |
42 |
47 |
42 |
47 |
42 |
47 |
42 |
47 |
42 |
47 |
| A |
mm |
128 |
138 |
146 |
160 |
174 |
195 |
| B |
mm |
73 |
77 |
81 |
86 |
86 |
90 |
94 |
100 |
103 |
108 |
110 |
116 |
| Cmin |
mm |
31 |
33 |
37 |
39 |
43 |
45 |
| D |
mm |
105 |
115 |
118 |
134 |
145 |
162 |
| E |
mm |
20 |
22 |
22 |
22 |
22 |
25 |
25 |
28 |
25 |
25 |
30 |
35 |
| F |
mm |
108 |
113 |
121 |
125 |
130 |
134 |
140 |
146 |
150 |
156 |
158 |
164 |
| G |
mm |
61 |
65 |
66 |
71 |
70 |
75 |
78 |
84 |
83 |
88 |
90 |
96 |
| Y |
mm |
2,2 |
2,9 |
2,3 |
3,2 |
2,5 |
3,4 |
2,8 |
3,8 |
3,0 |
4,0 |
3,2 |
4,3 |
| X |
mm |
5,2 |
6,9 |
5,8 |
7,8 |
6,1 |
8,1 |
6,7 |
9,0 |
7,3 |
9,7 |
7,8 |
10,5 |
|
|
X = Slip at ßmax
Y = Displacement for ßmax
The Mtmax value indicated corresponds to static
torque at an angle of 0°; it is only briefly applicable and must not be
exceeded.
The information in this technical data sheet allow user
to make a guideline selection of the type of joint in accordance with
available clearance, torque, steering and service life requirements. Double
joints in this series with central lubrification are supplied with the
SOREM single point lubrification system.
Joints of different sizes and for larger angles are available
on request. Please contact the SOREM engineering department for further
details and information regarding products with different characteristics
to those indicated
SOREM reserves the right to change data and product characteristics
without prior notification. |
|
