| |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
55 YEARS
CONVEYING ENERGY |
|
| |
DOUBLE UNIVERSAL JOINTS SERIES S600 |
Print |
|
|
Shafts in induction hardened and tempered 41 Cr Mo
4 (shaft with sun gear in cemented and hardened 18 Ni Cr Mo 5); available
on request in 50 Cr V 4. Central body in hardened and tempered C 50.
Very compact double universal joint to use with steering drive-axles for
torque range from 3300 Nm to 12500 Nm.
The flat-type cross piece reduces the space necessary to allocate the
rotating universal joint.
The first-type half axles can fit directly into the planetary gear. |
|
 |
| Tipo/Tip/Type |
630 |
632 |
647 |
| Mtmax |
Nm |
3300 |
4000 |
12500 |
| ßmax |
° |
48 |
48 |
40 |
| A |
mm |
112 |
116 |
168 |
| B |
mm |
69 |
72 |
96 |
| Cmin |
mm |
27 |
28 |
42 |
| D |
mm |
155 |
170 |
235 |
| F |
mm |
98 |
102 |
140 |
| G |
mm |
57 |
58 |
74 |
| Y |
mm |
1,39 |
1,45 |
1,93 |
| X |
mm |
6,52 |
6,81 |
6,16 |
|
|
X = Slip at ßmax
Y = Displacement for ßmax
The Mtmax value indicated corresponds to static
torque at an angle of 0°; it is only briefly applicable and must not be
exceeded.
The information in this technical data sheet allow user
to make a guideline selection of the type of joint in accordance with
available clearance, torque, steering and service life requirements.
Joints of different sizes and for larger angles are available
on request. Please contact the SOREM engineering department for further
details and information regarding products with different characteristics
to those indicated
SOREM reserves the right to change data and product characteristics
without prior notification. |
|
