Sorem Macchine website
 

         
Company Technology Quality Products Info
         
 
 
  - Serie S200
  - Serie S200H
  - Serie S300
  - Serie S400
  - Serie S500
  - Serie S600
  Universal Joint Crosses
  Special Products
  Technical Notes
  Statistics
  55 YEARS
CONVEYING ENERGY
  UNIVERSAL JOINTS CROSSES Print  

SERIES S200 SERIES S300
Universal joint crosses for S 200 and S 200H double universal joints. available in the following versions: "Long Life", with central lubrification nipple or for central lubrification system. Universal joint crosses for S 300 and S 500H double universal joints. New generation crosses, with a specially shaped pin coupling that makes it possible to transmit greater torque with the same clearance.

Grandezza - Größe - Size 200 210 215 220 230 300 310 320 330 335 340
Mtmax Nm 1100 1600 2000 3100 3900 1550 2300 3400 5100 5800 7500
A mm 61,3 74,54 81,82 92,1 106,3 62,5 71 82 93 106,6 106,285
B mm 23,83 27 27 30,2 30,2 23,83 27 30,2 34,92 34,92 39,635
Anello seeger
Seeger-Ring
Seeger ring
mm J24x1,5 J27x1,5 J27x1,5 J30x1,5 J30x1,5 J24x1,5 J27x1,5 J30x1,5 J35x1,5 J35x1,5 J40x1,75

Available in the following versions: "Long Life", with central lubrification nipple or for central lubrification system.

Type 1: Long Life
Type 3: with central lubrification nipple
Type 5: for central lubrification system

The Mtmax value indicated corresponds to static torque at an angle of 0°; it is only briefly applicable and must not be exceeded

SERIES S400 SERIES S600
Universal joint crosses for S 400 double universal joints.
Crosses with offset pins in order to reduce clearance of the joint to a minimum during rotation.
Available in the following versions: "Long Life" or for central lubrification system.
Universal joint crosses for S 600 double universal joints.
Crosses with offset pins in order to reduce clearance of the joint to a minimum during rotation.
Available in the following versions: "Long Life" or for central lubrification system.
Grandezza - Größe - Size 435 438 442 450 455 460 630 632 647
Mtmax Nm 5100 7000 8500 11000 13000 16900 3300 4000 12500
A mm 96 107 110 125 134 152 82 83 126
B mm 35 38 42 45 50 50 96 101 142
C mm - - - - - - 6 7 11
D mm - - - - - - 30 32 47
Anello seeger
Seeger-Ring
Seeger ring
mm J35x1,5 J38x1,5 J42x1,75 J45x1,75 J50x2 J50x2 J30x1,5 J32x1,5 J47x2

The Mtmax value indicated corresponds to static torque at an angle of 0°; it is only briefly applicable and must not be exceeded

Please contact the SOREM engineering department for further details and information regarding products with different characteristics to those indicated

SOREM reserves the right to change data and product characteristics without prior notification.

 
       
  Italiano Deutsch  
Studio Grafico Castelli